Public printing recommendation
Eryone Standard White PP White
MaterialID MAT0194
3DPIceland Labs
Generated with 3DPIceland Engineering Platform v60.0.6 WORKFLOW-RELIABILITY - Bug Fixes and Workflow Reliability
2026-08-25 19:05:46
Guidance boundary: values below are shared base-material guidance resolved only through the canonical BaseMaterialId link. They are not manufacturer-, spool- or printer-specific validated settings. Missing fields remain Not recorded.
Overall
49/100
49/100
Engineering axes
5/5
5/5
Public rank
92 / 234
92 / 234
MSRP USD/kg
30.43
30.43
Engineering profile
Recommended applications
- Repeatable print jobs and production-style batches
- Cosmetic parts, concept models or low-load prototypes
- Avoid high tensile load applications
Measured strengths
- Layer adhesion: 55/100. Z-axis bonding is better than the material-family context.
- Consistency: 86/100. Repeatability is one of the stronger signals in this material profile.
- Impact: 41/100. Impact behavior is competitive against the material-family context.
Limitations
- Tensile: 15/100. Avoid using this as the primary choice for tensile-loaded parts.
Engineering trade-offs
- Good repeatability does not compensate for low tensile capability in load-bearing designs.
- Layer bonding may be acceptable, but stiffness is still a limiting design factor.
- The report should be read as a suitability warning rather than a general-purpose recommendation.
Base-material printing guidance
| Guidance | Minimum | Recommended | Maximum | Unit |
|---|---|---|---|---|
| Nozzle temperature | 270 | 270 | 280 | °C |
| Bed temperature | 85 | 95 | 100 | °C |
| Print speed | 10 | 45 | 45 | mm/s |
| Cooling | 0 | 0 | 0 | % |
| Guidance | Value | Unit |
|---|---|---|
| Cooling guidance | Off | |
| Drying temperature | 70 | °C |
| Drying time | 6 | hours |
| Enclosure | Required | |
| Printer / G-code reference | PrusaCoreOneL | |
| Slicer profile reference | Prusament PP |
Print workflow checks
- Confirm nozzle temperature, bed temperature, speed, cooling and drying requirements from the manufacturer profile or spool label.
- Print a small validation part before committing to a long, costly or safety-relevant print.
- Orient the part so the governing load does not rely on an unverified or weak engineering axis.
Decision guidance
- Use this material mainly for low-load, visual or experimental parts.
- Do not choose it as a tensile-strength benchmark material.
Stronger same-family alternatives
| MaterialID | Material | Manufacturer | Overall | Tensile | Impact |
|---|
Confirm exact settings against the manufacturer profile, spool label and actual printer/material combination. Results do not replace application-specific validation.