Public printing recommendation
Extrudr DuraPro PA6 GF Black
MaterialID MAT0025
3DPIceland Labs
Generated with 3DPIceland Engineering Platform v60.0.6 WORKFLOW-RELIABILITY - Bug Fixes and Workflow Reliability
2026-08-25 19:05:46
Guidance boundary: values below are shared base-material guidance resolved only through the canonical BaseMaterialId link. They are not manufacturer-, spool- or printer-specific validated settings. Missing fields remain Not recorded.
Overall
59/100
59/100
Engineering axes
6/5
6/5
Public rank
11 / 234
11 / 234
MSRP USD/kg
39.63
39.63
Engineering profile
Recommended applications
- Rigid brackets, fixtures and shape-stable prototypes
- Repeatable print jobs and production-style batches
Measured strengths
- Layer adhesion: 44/100. Z-axis bonding is better than the material-family context.
- Consistency: 77/100. Repeatability is one of the stronger signals in this material profile.
- Impact: 48/100. Impact behavior is competitive against the material-family context.
- Stiffness: 80/100. Stiffness is a relative advantage in this comparison group.
Limitations
- Stiffness: 80/100. Expect less shape stability than the stronger materials in the same family.
Engineering trade-offs
- The score profile is balanced enough that final material choice should depend on printability, finish, cost and environment.
Base-material printing guidance
| Guidance | Minimum | Recommended | Maximum | Unit |
|---|---|---|---|---|
| Nozzle temperature | 280 | 280 | 295 | °C |
| Bed temperature | 105 | 110 | 110 | °C |
| Print speed | 11 | 65 | 65 | mm/s |
| Cooling | 10 | 10 | 15 | % |
| Guidance | Value | Unit |
|---|---|---|
| Cooling guidance | Low | |
| Drying temperature | 100 | °C |
| Drying time | 12 | hours |
| Enclosure | Required | |
| Printer / G-code reference | PrusaCoreOneL | |
| Slicer profile reference | Yasin PA6 |
Print workflow checks
- Confirm nozzle temperature, bed temperature, speed, cooling and drying requirements from the manufacturer profile or spool label.
- Print a small validation part before committing to a long, costly or safety-relevant print.
- Orient the part so the governing load does not rely on an unverified or weak engineering axis.
- Reinforced filament: confirm an abrasion-resistant nozzle and manufacturer drying/storage requirements.
- Engineering/high-temperature family: confirm enclosure, ventilation, warping control and material-specific drying requirements.
Decision guidance
- Use this material for moderate requirements after checking the weakest axis.
- Review the listed alternatives if the application needs stronger overall performance.
Stronger same-family alternatives
| MaterialID | Material | Manufacturer | Overall | Tensile | Impact |
|---|---|---|---|---|---|
| MAT0210 | Eryone Standard Black PA6 GF Black | Eryone | 72/100 | — | 40/100 |
Confirm exact settings against the manufacturer profile, spool label and actual printer/material combination. Results do not replace application-specific validation.