Public engineering report
Eryone Standard Black PA12 GF Black
Public-data contract: This static report contains only allowlisted material identity, public links, canonical MSRP and existing Verified Material Summary / governed score outputs. It excludes raw specimen rows and non-public operational data.
Test coverage
Complete
Engineering axes
6/6
Public MSRP
$40.00 USD/kg
Material identity
| MaterialID | MAT0209 |
|---|---|
| Material | Eryone Standard Black PA12 GF Black |
| Manufacturer | Eryone |
| Product line | Standard |
| Base material | PA12 |
| Category | Engineering |
| Variant / finish | — |
| Reinforcement | GF |
| Color | Black |
Governed engineering profile
| Overall | 49/100 |
|---|---|
| Tensile | 33/100 |
| Impact | 67/100 |
| Stiffness | 56/100 |
| Consistency | 76/100 |
| Layer adhesion | 10/100 |
| Thermal | 60/100 |
| Best available axis | consistency |
Engineering score profile
Engineering radar
Selected material
Material average - PA12
Manufacturer average - Eryone
All axes use existing governed 0–100 engineering scores. Missing axes are shown at zero and remain listed as n/a elsewhere in the report.
Fixture thermal result
120 °C · score 60/100 · method 3dp-thermal-deflection-fixture-v1
Nearby BlueDOT probe-indicated fixture temperature from a non-standard comparative 3DPIceland method; not ASTM D648, ISO 75, specimen temperature, certified HDT or a manufacturer limit.
Nearby BlueDOT probe-indicated fixture temperature from a non-standard comparative 3DPIceland method; not ASTM D648, ISO 75, specimen temperature, certified HDT or a manufacturer limit.
Material and manufacturer context
| Metric | Selected material | Material average | Manufacturer average |
|---|---|---|---|
| Overall | 49/100 | 45/100 | 46/100 |
| Tensile | 33/100 | 32/100 | 25/100 |
| Impact | 67/100 | 40/100 | 37/100 |
| Stiffness | 56/100 | 54/100 | 72/100 |
| Consistency | 76/100 | 75/100 | 74/100 |
| Layer adhesion | 10/100 | 21/100 | 20/100 |
| Thermal | 60/100 | — | — |
Verified measurement results
Existing Verified Material Summary outputs. The public renderer does not read raw specimen rows or recalculate these values.
| Measurement | Average | Std. deviation | CV | Samples | Confidence |
|---|---|---|---|---|---|
| Tensile upright | 4.953 MPa | 2.736 MPa | 55.2% | 10 | 10/10 |
| Tensile flat | 48.634 MPa | 7.495 MPa | 15.4% | 10 | 10/10 |
| Impact upright | 175.06 kJ/m² | 34.566 kJ/m² | 19.7% | 10 | 10/10 |
| Impact flat | 1163.214 kJ/m² | 43.305 kJ/m² | 3.7% | 10 | 10/10 |
| Stiffness modulus | 1692.773 MPa | — | — | — | — |
| Stiffness deflection | 3.206 mm | — | — | — | — |
Measurement provenance
Canonical per-module measured dates from SQLite, shown in unambiguous ISO format. Missing dates are not inferred.
| Module | Measured date |
|---|---|
| Tensile | 2026-08-01 |
| Impact | 2026-08-01 |
| Stiffness | 2026-08-01 |
| Thermal | Not recorded |
Engineering interpretation
Summary: Eryone Standard Black PA12 GF Black has a specialized or limited engineering profile. It is above its material-family average by 4,2 points and above its manufacturer average by 2,4 points. Its strongest measured axis is Consistency, while the weakest axis is Layer Adhesion.
Data-driven review: Eryone Standard Black PA12 GF Black is best understood as a repeatable material for cosmetic, concept and low-load prototype work. Compared with the current verified dataset, it ranks better than 59% overall, is above the material-family average by 4,2 points, and is roughly aligned with the manufacturer average. Its strongest engineering signal is Consistency, while Layer Adhesion is the main limitation to consider before using it for demanding applications.
Best feature
Consistency
Main limitation
Layer Adhesion
Dataset position
Better than 59%
98 / 234
Strengths
- Consistency: 76/100. Repeatability is one of the stronger signals in this material profile.
- Impact: 67/100. Impact behavior is competitive against the material-family context.
Limitations
- Tensile: 33/100. Avoid using this as the primary choice for tensile-loaded parts.
- Layer adhesion: 10/100. Z-axis performance should be treated with caution.
Engineering trade-offs
- Good repeatability does not compensate for low tensile capability in load-bearing designs.
- The report should be read as a suitability warning rather than a general-purpose recommendation.
Recommended applications
- Impact-aware parts where toughness matters
- Repeatable print jobs and production-style batches
- Cosmetic parts, concept models or low-load prototypes
- Avoid high tensile load applications
Metric rankings and percentiles
| Metric | Score | Rank | Percentile |
|---|---|---|---|
| Overall | 49/100 | 98 / 234 | Better than 59% |
| Tensile | 33/100 | 64 / 226 | Better than 72% |
| Impact | 67/100 | 3 / 226 | Better than 99% |
| Stiffness | 56/100 | 195 / 223 | Better than 13% |
| Consistency | 76/100 | 145 / 231 | Better than 38% |
| Layer adhesion | 10/100 | 204 / 226 | Better than 10% |
| Thermal | 60/100 | 9 / 209 | Better than 96% |
Decision guidance
- Use this material mainly for low-load, visual or experimental parts.
- Review the listed alternatives if the application needs stronger overall performance.
- Do not choose it as a tensile-strength benchmark material.
Better alternatives
| MaterialID | Material | Manufacturer | Overall | Tensile | Impact |
|---|---|---|---|---|---|
| MAT0214 | Eryone Standard Black PA12 CF Black | Eryone | 53/100 | 43/100 | 46/100 |
Peer context
Highest-scoring same-base-material peers from the current governed dataset. This context is descriptive and is not recalculated by the public renderer.
| MaterialID | Material | Manufacturer | Overall | Tensile | Impact |
|---|---|---|---|---|---|
| MAT0214 | Eryone Standard Black PA12 CF Black | Eryone | 53/100 | 43/100 | 46/100 |
| MAT0167 | BambuLab Basic PA12 PAHT CF Black | BambuLab | 51/100 | 39/100 | 41/100 |
| MAT0020 | Extrudr DuraPro PA12 Black | Extrudr | 50/100 | 34/100 | 50/100 |
| MAT0022 | Fillamentum FX256 PA12 Clear | Fillamentum | 45/100 | 28/100 | 47/100 |
| MAT0019 | MatterHackers NylonX PA12 CF Black | MatterHackers | 42/100 | 32/100 | 22/100 |
| MAT0239 | Yasin Standard Black PA12 CF Black | Yasin | 41/100 | 33/100 | 25/100 |
| MAT0196 | Extrudr DuraPro Black PA12 CF Black | Extrudr | 40/100 | 28/100 | 44/100 |
| MAT0021 | Yasin Standard Black PA12 Black | Yasin | 31/100 | 22/100 | 13/100 |
Public links
Methodology and limitations
Results are comparative 3DPIceland measurements from home-built test equipment. Thermal is a nearby BlueDOT probe-indicated fixture temperature, not ASTM D648, ISO 75 or specimen temperature. Missing evidence remains n/a. Scores and test results are not recalculated by this publishing layer and do not replace certified manufacturer datasheets or accredited laboratory testing.